top of page

LumaQuote

Log In Start Free

Lighting rebates / Maryland

BGE Lighting Incentives

Fill the BGE Lighting Worksheet from your audit.

BGE's Energy Solutions for Business program pays for lighting and controls upgrades, and every lighting application needs BGE's Excel Lighting Worksheet, room by room. BGE scores Service Providers on how complete that worksheet is. LumaQuote fills it from your site audit, so the space types, existing codes, measures and controls are in before you upload.

Start free See how the fill works

Works on every plan, Free included. You still submit to BGE yourself.

Checked on BGE's own site on November 13, 2026: BGE Lighting & Controls, BGE Lighting Technical Sheet, BGE Application Evaluation System.

Program

Energy Solutions for Business: Lighting and Controls, part of BGE Smart Energy Savers (EmPOWER Maryland).

Incentive

Up to 50% of the cost of lighting upgrades. Measure rates are in BGE's Lighting Technical Sheet.

Who submits

Anyone other than the BGE customer must be an approved Service Provider before submitting. Incentives aren't released until the Service Provider and the installation contractor are both registered.

Pre-approval

Every lighting application needs a BGE pre-approval letter, whatever the incentive amount.

Program file

The Excel Lighting Worksheet, uploaded to the BGE Application Center. Not a PDF, and not an older version.

What it pays

What BGE pays for lighting

BGE publishes measure-level rates in its Lighting Technical Sheet. What its program pages say in general:

RuleWhat BGE says
Incentive levelUp to 50% of the cost of lighting upgrades.
ProductsLED lamps and luminaires must be on the DLC or ENERGY STAR qualified products list.
MeasuresReplacing lamps and ballasts in existing fixtures, and new high-efficiency fixtures in existing buildings.
Scope changesNotify BGE before changing an approved project scope.

BGE grades each Service Provider's applications over six months. A missing or outdated worksheet, a PDF instead of Excel, or blank mandatory fields such as building type, space description, controls, lumens and efficacy all count against the score, and a low average can restrict participation.

How a project goes

From audit to payment with BGE

  1. 1

    Become a Service Provider

    Apply and get approved before submitting any application for a customer.

  2. 2

    Fill the Lighting Worksheet

    Room by room, in the current Excel worksheet, with cut sheets for every luminaire, kit, lamp and control and the customer-signed Terms and Conditions.

  3. 3

    Submit in the Application Center

    BGE reviews it and issues the pre-approval letter. The customer signs it.

  4. 4

    Close it out

    Upload the signed pre-approval letter and invoices for all measures once the work is done.

The program file

What LumaQuote fills in the Lighting Fixtures & Controls Worksheet

On the Rebates step, LumaQuote checks the project, asks the program's own questions once, then fills BGE's file and gives it back to you. Your formulas, dropdowns and protection stay as the program built them.

Filled from your audit

  • Project information and one model per product
  • Location, interior or exterior, space type and space size for each line
  • Existing fixture category and device code
  • Measure type, description and model select
  • Quantities, plus occupancy and daylight controls
  • Up to 1,000 lines

You finish in the file

  • Heating fuel type and the contact person
  • DLC or ENERGY STAR ID and reported lumens for each model
  • A model number wherever LumaQuote entered the product name
  • Space type or size for any space the audit didn't record

LumaQuote doesn't have these, so it lists them after the download.

What LumaQuote decided

  • Lumen bands are estimated from LED watts at about 130 lm/W, and marked. Check them against each product's reported lumens.
  • BGE sets operating hours from the space type, so LumaQuote's hours aren't entered.
  • Type A and B tubes and screw-in lamps have no measure in the worksheet. LumaQuote lists those lines instead of guessing.
  • Exterior lines use the Light Business/Industrial lighting zone. Change it if the site is elsewhere.

Only cells a person could type in are written. If BGE moves an input cell in a new version, LumaQuote skips it and tells you. See a worked example

Before you submit

Four checks on every BGE lighting job

1

Service Provider first

Submitting for a customer before approval cancels the application.

2

Current Excel worksheet

Download it again for each job and upload it as Excel. An old version or a PDF costs you points.

3

Mandatory fields

Building type, space description, controls, lumens and efficacy. These are the blanks BGE scores down.

4

Maryland tube ban

Maryland added linear fluorescent tubes to its sales ban in 2026, so T8 jobs need a lasting fix, not relamps.

Show the BGE incentive as an estimate

The program sets the final number after its review. LumaQuote marks every incentive line in the proposal as an estimate, separate from the LED and controls savings, so the customer sees what is confirmed and what isn't.

See a sample proposal

FAQ

BGE lighting incentives: common questions

Do I need to be a BGE Service Provider to submit a lighting application?

Yes, unless you are the BGE customer. BGE requires any other party submitting an application and installing measures to be approved as an Energy Solutions for Business Service Provider first, and incentives aren't released until both the Service Provider and the installation contractor are registered.

Does every BGE lighting project need pre-approval?

Yes. BGE says all lighting applications, regardless of the requested incentive amount, require a program pre-approval letter.

Can I upload the BGE Lighting Worksheet as a PDF?

No. BGE's evaluation system marks it down when the electronic Lighting Worksheet is uploaded in a format other than Excel, or when an outdated version is used.

How much does BGE pay for lighting upgrades?

BGE says incentives can cover up to 50% of the cost of lighting upgrades. Measure-level rates are in its Lighting Technical Sheet.

Is the BGE fill on the Free plan?

Yes. The verified program files, BGE included, work on every LumaQuote plan.

BGE links: BGE Lighting & Controls · Lighting Technical Sheet · Become a Service Provider

Audit on site. Get the BGE file filled.

Capture the job on iPad, phone or desktop, then let LumaQuote fill the program's file and build the proposal from the same data. Free plan, no credit card.

Start free Book a demo

Questions: info@lumaenergy.ca

Other program files LumaQuote fills: Energy Trust of Oregon Idaho Power NHSaves Rhode Island Energy All lighting rebates

bottom of page