top of page

LumaQuote

Log In Start Free

Lighting rebates / Oregon

Energy Trust of Oregon Lighting Incentives

Fill the Energy Trust Lighting Tool from your audit.

Energy Trust of Oregon pays Business Lighting incentives through its trade ally network, and every project is submitted in Energy Trust's Lighting Tool. LumaQuote fills that file from your site audit, so trade allies spend their time on the job instead of retyping fixture counts.

Start free See how the fill works

Works on every plan, Free included. You still submit to Energy Trust of Oregon yourself.

Checked on Energy Trust of Oregon's own site on November 13, 2026: Energy Trust Insider: Lighting forms and resources, Energy Trust: Business Lighting incentives.

Program

Business Lighting, for existing buildings, production efficiency and multifamily buildings.

Who submits

Only enrolled Business Lighting trade allies. Energy Trust doesn't accept applications from other contractors or from customers installing their own lights.

Program file

Lighting Tool v2026.1. Energy Trust requires it for every project submitted for an incentive agreement. The version is at the top of the 100L tab.

Tubes

TLEDs and HLEDs go through the Instant Discount offer at participating distributors, except for K-12 public schools and government entities.

Eastern Oregon

Idaho Power customers use the Idaho Power program instead.

What it pays

Energy Trust of Oregon lighting incentives in 2026

Standard incentives as listed by Energy Trust. They are subject to funding and may change; the PI 190L information sheet has the current figures.

EquipmentIncentive
Interior LED fixtures and retrofit kits (100 W or less)$50 to $125 per fixture, $80 to $190 with LLLC.
High bay and low bay LED$120 to $300 per fixture, $175 to $355 with LLLC. Must be listed in the DLC high-bay category.
Exterior LED$35 to $525 per fixture, $100 to $625 with LLLC.
Occupancy or vacancy sensors$30 to $60 per sensor.
LED retrofit lamps$3 per lamp.
LED case lighting$2 to $14.50 per linear foot.
Custom LLLC systems and custom controls$0.25 and $0.35 per annual kWh saved. Each measure must be pre-qualified.

Most standard incentives are capped at 50% of eligible measure cost. LED fixtures with LLLC or occupancy controls go up to 70% of combined fixture and control cost, and controls up to 100%.

How a project goes

From audit to payment with Energy Trust of Oregon

  1. 1

    Enroll as a trade ally

    Part 2, Section 4 of Energy Trust's Program Guide for Business Lighting Trade Allies covers enrollment. Questions go to lighting@energytrust.org.

  2. 2

    Build the project in Lighting Tool v2026.1

    Submit it to Energy Trust for review and an incentive agreement before the install.

  3. 3

    Watch the reservation dates

    The Incentive Application Form (120L) carries the reservation expiration and signing deadline.

  4. 4

    Close it out

    After the install, the trade ally sends the invoices and completion documents to Energy Trust.

The program file

What LumaQuote fills in the Lighting Tool v2026.1

On the Rebates step, LumaQuote checks the project, asks the program's own questions once, then fills Energy Trust of Oregon's file and gives it back to you. Your formulas, dropdowns and protection stay as the program built them.

Filled from your audit

  • Customer and site details
  • The weekly schedule and each line's annual operating hours
  • Existing fixtures, from the tool's own lists
  • One equipment type per product with its wattage bucket (up to 50 products)
  • Quantities, plus labour and material cost per unit
  • Up to 200 lines

You finish in the file

  • Electric utility, account number and rate schedule
  • Manufacturer and model number for any equipment type without one
  • Controls, on the tool's Controls tab (Energy Trust pays controls separately)
  • Square footage affected, if the project doesn't have it

LumaQuote doesn't have these, so it lists them after the download.

What LumaQuote decided

  • LumaQuote asks once for the building use type and guesses it from the largest space.
  • Annual hours come from LumaQuote's hours for each line. Energy Trust may ask you to support them.
  • Existing fixtures that don't match one of the tool's types are entered as Other with their description and watts, and listed after the download.

Only cells a person could type in are written. If Energy Trust of Oregon moves an input cell in a new version, LumaQuote skips it and tells you. See a worked example

Before you submit

Four checks on every Energy Trust of Oregon lighting job

1

Trade ally status

Enrollment comes first. Without it, the project can't get a Business Lighting incentive.

2

Right file version

Use v2026.1. An older Lighting Tool isn't accepted for an incentive agreement.

3

Tubes go instant

Quote TLEDs through a participating distributor's instant discount, not the Lighting Tool.

4

Supportable hours

Set hours per space from what you saw on site. Energy Trust can ask where they came from.

Show the Energy Trust of Oregon incentive as an estimate

The program sets the final number after its review. LumaQuote marks every incentive line in the proposal as an estimate, separate from the LED and controls savings, so the customer sees what is confirmed and what isn't.

See a sample proposal

FAQ

Energy Trust of Oregon lighting incentives: common questions

Do I have to be a trade ally to get Energy Trust lighting incentives?

Yes. Only enrolled Energy Trust Business Lighting trade allies can offer Business Lighting incentives. Energy Trust doesn't accept applications from non-trade allies or directly from customers installing their own projects. Contractors outside the network can still pass along instant discounts from participating distributors.

Which Lighting Tool version does Energy Trust accept?

Lighting Tool v2026.1. Energy Trust says all projects submitted for an incentive agreement must use it, and the version is shown at the top of the 100L tab.

Are LED tubes covered by Energy Trust Business Lighting?

TLEDs and HLEDs are offered only through the Instant Discount offer at participating distributors, with an exception for K-12 public schools and government entities.

How much does Energy Trust pay for interior LED fixtures?

Energy Trust lists $50 to $125 per interior fixture or retrofit kit of 100 W or less, and $80 to $190 with LLLC. Most standard incentives are capped at 50% of eligible measure cost.

Is the Energy Trust fill on the Free plan?

Yes. The verified program files, Energy Trust included, work on every LumaQuote plan.

Energy Trust of Oregon links: Lighting Tool and trade ally forms · Business Lighting incentives · lighting@energytrust.org

Audit on site. Get the Energy Trust of Oregon file filled.

Capture the job on iPad, phone or desktop, then let LumaQuote fill the program's file and build the proposal from the same data. Free plan, no credit card.

Start free Book a demo

Questions: info@lumaenergy.ca

Other program files LumaQuote fills: Idaho Power NHSaves BGE Rhode Island Energy All lighting rebates

bottom of page